$7.99 +Tx
$8.88 / 100 ML
Added to Your Shopping Cart
Product Availability by Store Location
Hours
Drug caution code
Drug caution code
with HydraGlyde™ MOISTURE MATRIX
Enhanced All Day Comfort
Clinically proven
Provides a Cushion of Moisture
Comfort from Insertion to Removal
Cleans
Reconditions
Rinses
Disinfects
Stores
For All Soft Contact Lenses, Including Silicone Hydrogels
Sterile
Enhanced All Day Comfort
Clinically proven
Provides a Cushion of Moisture
Comfort from Insertion to Removal
Cleans
Reconditions
Rinses
Disinfects
Stores
For All Soft Contact Lenses, Including Silicone Hydrogels
Sterile
Shape
SOLUTION
Sub brand name
PureMoist
U.P.C
300650370547
#NPN
N/A
#DIN
00000000
Content
0.0 / 0.0
Directions
Always wash and rinse hands thoroughly and dry with a clean, lint free towel before handling your contact lenses.
1. Thoroughly wet each side of the lens.
2. Rub each side of the lens for 10 seconds (for a total rubbing time of 20 seconds).
3. Rinse each side of the lens for 10 seconds with a steady stream (for a total rinsing time of 20 seconds).
4. Fill the Alcon Lens Case with fresh solution. Store lenses in the closed lens case overnight or at least 6 hours. After soaking, lenses are ready to wear. If any debris remains on contact lenses, rinse with OPTI-FREE™ PureMoist™ prior to lens insertion. You may leave your lenses in the unopened lens case containing OPTI-FREET™ PureMoist™ for up to 30 days. After this time, your lenses must be cleaned and disinfected with fresh OPTI-FREE™ PureMoist™ prior to wear.
Always wash and rinse hands thoroughly and dry with a clean, lint free towel before handling your contact lenses.
1. Thoroughly wet each side of the lens.
2. Rub each side of the lens for 10 seconds (for a total rubbing time of 20 seconds).
3. Rinse each side of the lens for 10 seconds with a steady stream (for a total rinsing time of 20 seconds).
4. Fill the Alcon Lens Case with fresh solution. Store lenses in the closed lens case overnight or at least 6 hours. After soaking, lenses are ready to wear. If any debris remains on contact lenses, rinse with OPTI-FREE™ PureMoist™ prior to lens insertion. You may leave your lenses in the unopened lens case containing OPTI-FREET™ PureMoist™ for up to 30 days. After this time, your lenses must be cleaned and disinfected with fresh OPTI-FREE™ PureMoist™ prior to wear.
For your protection, this bottle has an imprinted seal around the neck. Do not use if the seal is damaged or missing at the time of purchase. Remove imprinted seal around bottle neck completely before use.
WARNINGS
- DO NOT reuse or "top off" solution in the case since this may reduce effective lens disinfection
- To avoid contamination, never touch the dropper tip of the container to any surface. Replace cap after using.
- Keep the container tightly closed when not in use
STOP USE AND ASK A DOCTOR IF you experience persistent eye discomfort, excessive tearing, vision changes or redness of the eye, immediately remove your lenses as the problem could be more serious.
KEEP OUT OF THE REACH OF CHILDREN.
Other information
- Do not use OPTI-FREE™ PureMoist™ Solution if you are allergic to any of the ingredients.
- Store between 15℃ and 30℃.
- Use before the expiration date marked on the product
- Discard 6 months after opening
WARNINGS
- DO NOT reuse or "top off" solution in the case since this may reduce effective lens disinfection
- To avoid contamination, never touch the dropper tip of the container to any surface. Replace cap after using.
- Keep the container tightly closed when not in use
STOP USE AND ASK A DOCTOR IF you experience persistent eye discomfort, excessive tearing, vision changes or redness of the eye, immediately remove your lenses as the problem could be more serious.
KEEP OUT OF THE REACH OF CHILDREN.
Other information
- Do not use OPTI-FREE™ PureMoist™ Solution if you are allergic to any of the ingredients.
- Store between 15℃ and 30℃.
- Use before the expiration date marked on the product
- Discard 6 months after opening
Active ingredient
Polyquad™ preservative (polyquaternium-1) 0.001% (purpose: contact lens disinfectant), Aldox™ preservative (myristamidopropyl dimethylamine) 0.0006% (purpose: contact lens disinfectant)
Inactive ingredients aminomethylpropanol, boric acid, disodium EDTA, HydraGlyde™ Moisture Matrix (EOBO-41™ polyoxyethylene-polyoxybutylene), poloxamine, purified water, sodium citrate, sodium chloride, sorbitol, hydrochloric acid and/or sodium hydroxide (to adjust pH)
Polyquad™ preservative (polyquaternium-1) 0.001% (purpose: contact lens disinfectant), Aldox™ preservative (myristamidopropyl dimethylamine) 0.0006% (purpose: contact lens disinfectant)
Inactive ingredients aminomethylpropanol, boric acid, disodium EDTA, HydraGlyde™ Moisture Matrix (EOBO-41™ polyoxyethylene-polyoxybutylene), poloxamine, purified water, sodium citrate, sodium chloride, sorbitol, hydrochloric acid and/or sodium hydroxide (to adjust pH)